How To View Uokoo C25 Camera Over The Internet

In this article, there are 5 ways you can connect your Security IP Camera to your computer. And nosotros will cover the steps on how you should do it without a router, without internet, without a DVR/NVR or without its receiver. The following table summarizes the important information near connecting IP camera to your reckoner for your reference.

Photographic camera types:	POE camera or WiFi photographic camera
Os(performance arrangement):	Windows or Mac
Cable:	2-in-i or 3-in-1 cable attached from the photographic camera
Remotely access by:	Photographic camera's UID

Note: First you should install the security camera in the right place. You can refer to How to Install Home Security Cameras Successfully.

5 Methods to Connect Your Security IP Camera to PC/Mac：

To arrive easier for you to discover the right solution, you can click and jump directly to the section you want.

For example, if your camera is a PoE camera, then yous tin can choose option iii or 4.

1. Connect Directly to PC/Mac (without Net)
2. Connect via Router (with Net)
three. PoE (Wired) Camera without Injector/Switch
4. PoE (Wired) Camera with Injector/Switch
5. Connect a CCTV Camera Organisation to PC/Mac

Important Annotation: The methods recommended below may Non apply for the bombardment-powered security cameras, which require initial setup on your phones.

Connect a WiFi or PoE Camera Directly to PC/Mac (without Internet)

Here's how to connect your security IP camera directly to a PC/Mac without an NVR or DVR, without a router network, without WiFi, and without any costs or complicated configurations.

you need to prepare the camera's ability adapter and a network cable.

one. Get your security camera charged.

Use the ability adapter to get the camera plugged-in and charged. Normally, when you purchase a WiFi IP camera, information technology comes with a ability adapter. For a PoE photographic camera, inquire the supplier and buy 1 that'southward workable for the camera.

ii. Utilize the network cablevision to connect to the camera and the computer.

Usually there would be a 2-in-1 or iii-in-one cablevision attached from the camera. Find the network connector from that cable and use the network cable to connect to information technology. So connect the other cease of the network cable to the computer. If your figurer has a network already, disable information technology – brand sure your computer is offline. Connect IP Camera Directly to PC

3. Browse and detect out the security photographic camera's IP accost on the computer.

Now the security camera is connecting to your estimator basically and physically. But you still tin't view the camera on the computer. What you demand to do now is to browse and detect out the camera'due south IP address. There should be surveillance software from the same supplier with the photographic camera. Accept our test equally an example. We have Reolink Customer on the computer. Launch it and it will automatically browse all the cameras in the same local LAN and bear witness the default IP accost (every camera has a default and unique IP address when it leaves the manufacturing plant). Easy peasy! Camera IP Address

iv. Change the figurer'due south IP accost to the same network prefix of the IP camera.

So in Footstep 3, y'all get your security camera'south default IP address. In our test, the default IP accost of the photographic camera we utilize is 192.168.177.100, and now you need to change your computer's IP accost to 192.168.177.x, where x identifies the node/host and is the number betwixt 2 and 254. And then let'south say the computer's IP address is 192.168.177.12.

IP address 101: An IP address consists of two parts – ane belongs to the network address and one belongs to the node address. All nodes on a given network share the same network prefix but have a unique host number.

At present to change the calculator'due south IP accost (we accept Windows 10 as an example):

i) Press the Windows + R keyboard shortcut to bring out the Run box.

2) Enter "ncpa.cpl" and open the "Network Connections" window.

Computer Run Box

3) Right-click your reckoner' network adapter and select "Properties".

Network Adapter Properties

four) Select your figurer's Internet Protocol Version and click "Properties".

Internet Protocol Properties

5) Select "Use the post-obit IP accost" and change the IP accost into 192.168.177.12.

Change Computer IP Address

And washed. Now your IP camera is connecting directly and communicating with your PC, considering they are now in the aforementioned piddling LAN. You can lookout your IP camera with Reolink Client on your computer.

Important: Since in that location is no router network, the IP camera would not transmit data or transport alarms to your telephone. All the same, you can record and save all the footage onto your figurer.

If you're gonna utilize your IP photographic camera with the reckoner all the time like this (without router network), you'd ameliorate change the default status of your IP camera's IP accost to the static to keep it the same all the time, because each fourth dimension you reboot the IP camera, its IP address will be changed and you will need to exercise all the steps above once more. To keep the IP camera'southward IP address the same all the time, head to "Device Settings" and "Network General" on the Client (Reolink Client in our test), and choose "Static" for "Network Access". And done. Static IP Address for Camera

Connect a Wireless/WiFi Camera to Figurer via Router (with Internet)

If you lot practice have WiFi network and need to remotely see the IP camera when you're not there, y'all tin connect your wireless or WiFi camera to computer wirelessly via your router. Delight note that you demand to accept, at least, a power adapter for the camera, a network cable, and a router.

i. Get your WiFi security camera charged.

Use the ability adapter to get the photographic camera plugged-in and charged.

ii. Use the network cable to connect to the camera and the router.

A WiF camera needs to connect to the router with a network cable for initial setup, because the new photographic camera itself wouldn't recognize and auto-pick upwards a network that it never uses. But later the correct WiFi settings can y'all disconnect the cable from the photographic camera and the router. And yeah again, normally there would exist a 2-in-i or 3-in-1 cable fastened from the WiFi camera. Find the network connector from that cablevision and use the network cablevision to connect to information technology. And so connect the other end of the network cable to the router. Connect WiFi Camera to PC

iii. Watch the IP camera on PC/Mac

On the estimator, launch the surveillance software to add the camera and watch live view straight. In our exam, we open Reolink Client. Since the reckoner and the camera are in the same network (using the same router network), Reolink Client automatically searches and displays the camera directly. Click "Get-go" and you lot tin view the photographic camera on PC. And you can prepare the configurations for all the functions you want the camera to have.

4. Gear up WiFi settings and remove the network cablevision.

Practice remember to brand the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Choose the WiFi network and enter the password, and done. Cameras from the different brands would have different WiFi settings. Delight refer to the guides you lot get from your supplier. After that, remove the network cable, and then the security IP CCTV camera connects to the computer wirelessly.

Important: If you need to run into the IP camera from another reckoner that is not in the same network, you need to input the camera's UID into the software to remotely access the camera.

Connect a PoE (Wired) IP Camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP camera to a computer via the router is similar to that of a WiFi camera, and even much easier – you don't demand to utilize a power adapter, set upwardly the WiFi and remove the network cable. And you need at least one network cable, and a router with PoE capability to consummate the setup.

1. Utilise the network cablevision to connect to the camera and the router.

PoE (Ability over Ethernet) means you tin but use a single network cable for both video and ability transmission. So but connect the camera to the router via the network cable, and the camera volition get power supply and network access. Cloud Storage Please brand sure your router has the PoE characteristic. If not, endeavour the adjacent method.

2. Watch the IP camera on the reckoner.

On the estimator, launch the surveillance software to add the camera and picket live view directly. In our test, we open up Reolink Customer. Since the computer and the camera are in the same network, Reolink Customer automatically searches and displays the camera directly. Click "Commencement" and you lot tin can view the photographic camera on PC. And yous can set up the configurations for all the functions you lot want the camera to take.

Important: If you lot need to encounter the IP camera from another computer that is not in the same network, you lot need to input the camera'southward UID into the software to remotely admission the photographic camera.

Connect a PoE (Wired) IP Photographic camera to Computer with PoE Injector/Switch

If your router does not support PoE, you demand a PoE injector or PoE switch to help connect your IP photographic camera to PC.In club to complete the setup you need at to the lowest degree a network cable, a router, and a PoE injector or PoE switch. Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the aforementioned to that of connecting without a PoE Injector/switch, we'd like to brand it more simpler to understand here.

1.connect the security camera, router and PoE injector

Connect all the devices as the pic showed beneath, make certain your wireless IP camera is connected to a power supply. PoE Camera Connecting to PC

2. Open Reolink Customer & add the camera straight

Y'all can now open Reolink Client on your computer, add the photographic camera and scout live view direct. If you need to run into the IP camera from another figurer that is non in the same network, you need to input the camera'south UID into the software to remotely access the camera.

Of import: In one case you connect the PoE IP photographic camera to the PoE injector or switch which is connected to a router via Ethernet cables, yous've successfully connected the camera to the network. For a wireless IP photographic camera, yous need to utilise a network cablevision to connect it to the router if you oasis't set up the WiFi network configuration. So the wireless IP camera is in the network. You tin can fix the WiFi configuration afterward to brand the wireless IP camera connect wirelessly.

Connect a CCTV Camera System to PC/Mac (with or without Network)

If yous are using a CCTV camera organization, like the Reolink PoE kit RLK8-410B4, instead of single security camera, you may need the following tutorial. A CCTV photographic camera system often have their own proprietary networks, and can piece of work with and without your router network.

ane. How to connect a CCTV security camera organisation to a calculator without router network

Connect all the cameras to the NVR:When y'all receive the new IP photographic camera arrangement you bought, connect all the devices you got – connect the NVR to your calculator'due south monitor and the mouse, use the power adapters to charge the NVR and cameras, etc. For a WiFi arrangement, one time the WiFi NVR and the WiFi cameras are charged, they connected to each other automatically and would start to communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.
Start watching the IP cameras:The startup and setup wizard will pop up to guide yous to watch your cameras and practise other configurations.

At present you can see all the IP cameras on your monitor and starting time recording.

2. How to connect a CCTV security camera system to a computer with router network

Exercise the stride ane shown higher up once again.
Connect the NVR to your router via the network cable provided.
Start watching the IP cameras.

The startup and setup wizard will pop upward to guide you to watch your cameras and exercise other configurations. If you need to meet the IP cameras from another calculator that is non in the same network, you need to input the NVR'south UID into the software to remotely admission the cameras.

Inforgraphic:

The infographic below likewise covers our 5 methods to connect IP security camera to PC/Mac . Hope this tin can be helpful to you lot.

How to Connect Security Camera to PC

Third-Party Software to Connect IP Camera to PC/Mac

You tin can too opt for 3rd-party software to connect and ready a security camera on the computer. Make sure the software can handle all the cameras on the network and back up all the features for the cameras. Normally, the 3rd-party software has several versions. And if you want to utilize full features of the photographic camera, you demand to pay for a premium version. If your security IP camera is not working properly every bit expected or if you get any bug, you tin effort the top 10 solutions to fix IP cameras not working.

For any questions, delight don't hesitate to leave it in your annotate. I will respond as presently as possible.

Source: https://reolink.com/connect-security-ip-camera-to-pc/

Posted by: connollyliffold.blogspot.com